jooby-codec
    Preparing search index...

    Interface IOperatorParametersExtended2

    interface IOperatorParametersExtended2 {
        channel1: TUint8;
        channel2: TUint8;
        channel3: TUint8;
        channel4: TUint8;
        channel5: TUint8;
        channel6: TUint8;
        defaultPlcPhase: TUint8;
        deltaCorMin: TUint8;
        displaySet21: IDisplaySet1OperatorParameter;
        displaySet22: IDisplaySet2OperatorParameter;
        displaySet23: IDisplaySet3OperatorParameter;
        displaySet24: IDisplaySet24OperatorParameter2;
        relaySetExt: IRelaySetExtOperatorParameter2;
        timeCorrectPassHalfhour: boolean;
        timeCorrectPeriod: TUint8;
        timeoutMagnetOff: TUint8;
        timeoutMagnetOn: TUint8;
    }
    Index

    Properties

    channel1 channel2 channel3 channel4 channel5 channel6 defaultPlcPhase deltaCorMin displaySet21 displaySet22 displaySet23 displaySet24 relaySetExt timeCorrectPassHalfhour timeCorrectPeriod timeoutMagnetOff timeoutMagnetOn

    Properties

    channel1: TUint8

    Additional load profile parameter 1.

    since build 302.17.001

    channel2: TUint8

    Additional load profile parameter 2.

    since build 302.17.001

    channel3: TUint8

    Additional load profile parameter 3.

    since build 302.17.001

    channel4: TUint8

    Additional load profile parameter 4.

    since build 302.17.001

    channel5: TUint8

    Additional load profile parameter 5.

    since build 302.17.001

    channel6: TUint8

    Additional load profile parameter 6.

    since build 302.17.001

    defaultPlcPhase: TUint8

    Default PLC phase.

    Value Phase
    0 A
    1 A
    2 B
    3 C
    deltaCorMin: TUint8

    Allowed correction interval. This parameter can only be set with third-level access.

    displaySet21: IDisplaySet1OperatorParameter

    Display settings for additional meter readings screens.

    since build 302.15.001

    displaySet22: IDisplaySet2OperatorParameter

    Display settings for additional meter readings screens.

    since build 302.15.001

    displaySet23: IDisplaySet3OperatorParameter

    Display settings for additional meter readings screens.

    since build 302.15.001

    displaySet24: IDisplaySet24OperatorParameter2

    Display settings for additional meter readings screens.

    since build 302.15.001

    relaySetExt: IRelaySetExtOperatorParameter2

    Extended relay settings.

    timeCorrectPassHalfhour: boolean

    Is the time correction with a transition across the half-hour boundary allowed.

    since build 302.25.001

    timeCorrectPeriod: TUint8

    Allowed correction period, in hours (24 hours by default).

    timeoutMagnetOff: TUint8

    Timeout for relay deactivation due to magnetic interference, in seconds.

    timeoutMagnetOn: TUint8

    Timeout for relay activation after removal of magnetic field, in seconds.

    Settings

    Member Visibility

    On This Page

    Properties